Ελληνικά

Αρχική/B&T SWISS MADE

B&T SWISS MADE

Κατηγορίες Κατηγορίες

Φίλτρα Φίλτρα

Εμφάνιση ως:

Ταξινόμηση:

Εμφάνιση:

B&T cartridge SIR 40x46mm

[Επικοινωνήστε για Τιμή]

The impulse cartridge SIR is the perfect choice for violent public order applications. The SIR is not only very accurate and therefore can be shot...

Προσθήκη στη Λίστα Αγαπημένων

B&T cartridge SIR-X 40x46mm

[Επικοινωνήστε για Τιμή]

The SIR-X cartridge is a more powerful descendant of the well established B&T SIR. It fires the same projectile like the SIR at a higher...

Προσθήκη στη Λίστα Αγαπημένων

B&T reloading device for SIR and SIR-X

[Επικοινωνήστε για Τιμή]

Thanks to the reloading device for SIR and SIR-X less lethal ammunition, training with the GL06 is easy and cost effective. After picking up cases...

Προσθήκη στη Λίστα Αγαπημένων

B&T launcher GL06 cal. 40mm

[Επικοινωνήστε για Τιμή]

The GL06 is not only the most accurate 40 mm LL-launcher on the market, it’s also very light, ergonomic and fast to shoot. The SIR ammunition...

Προσθήκη στη Λίστα Αγαπημένων

B&T 9 mm magazine for MP9/TP9/APC9/P26/KH9/GHM9

[Επικοινωνήστε για Τιμή]

For the B&T weapons MP9/TP9/APC9/P26/KH9/GHM9 five high quality 9 mm magazine of diffrent capacity, made of semi transparent polymer are offered....

Προσθήκη στη Λίστα Αγαπημένων

B&T magazine loader for MP9/TP9, APC9, KH9, GHM9 und P26 magazines

[Επικοινωνήστε για Τιμή]

The world’s fastest magazine loader. With the B&T magazine loader you will load your MP9/TP9, APC9, KH9, GHM9 und P26 magazines directly out of...

Προσθήκη στη Λίστα Αγαπημένων

B&T .45 ACP magazines for B&T APC45

[Επικοινωνήστε για Τιμή]

B&T offers three high quality metal magazines of different capacity for the APC45 in order to accomated the different needs of the operator.

Προσθήκη στη Λίστα Αγαπημένων

B&T bumper pad to magazine for B&T APC9/MP9/TP9/GHM9/KH9

[Επικοινωνήστε για Τιμή]

The B&T bumper pad made of elastomer prevents that even fully loaded magazines dropped during a magazine change, get damaged. Place over the magazine...

Προσθήκη στη Λίστα Αγαπημένων

USW Magazines

[Επικοινωνήστε για Τιμή]

Depending on the operational purpose, several magazine sizes fpr the USW as well as the USW COmpact are available. Therefore the operator can configure the...

Προσθήκη στη Λίστα Αγαπημένων

B&T magazine clamp B&T APC9/APC45/GHM9

[Επικοινωνήστε για Τιμή]

With the magazine clamp two magazines can be clamped together permanently. This safes a considerable amount of time when reloading, as the...

Προσθήκη στη Λίστα Αγαπημένων

B&T magazine for APC556/APC223 30 rounds cal. 5.56 x 45 black

[Επικοινωνήστε για Τιμή]

The Magpul magazines in caliber .233/5.56, made of glass fiber reinforced polymer, are one of the best on the market concerning reliability and low...

Προσθήκη στη Λίστα Αγαπημένων

B&T Jet funnel for B&T APC9 and APC45

[Επικοινωνήστε για Τιμή]

Sometimes fractions of seconds matter. May it be with a SWAT team in a firefight or a competitive shooter, using the B&T jet funnel one can speed up...

Προσθήκη στη Λίστα Αγαπημένων

B&T magazine loader for MP5 magazines

[Επικοινωνήστε για Τιμή]

The world’s fastest magazine loader. With the B&T magazine loader you will load your MP5 magazines directly out of the ammo box, in a fraction...

Προσθήκη στη Λίστα Αγαπημένων

B&T magazine for APC300 30 rounds cal. .300 Blackout

[Επικοινωνήστε για Τιμή]

In order to ensure a reliable feeding of cartridges in .300 Whisper and .300 Blackout with specilized bullets, B&T has developed this magazine....

Προσθήκη στη Λίστα Αγαπημένων

B&T Magazine floorplate with 20-rds reduction

[Επικοινωνήστε για Τιμή]

This special magazine floorplate was designed to reduce, the capacity of 25 or 30 rounds magazines to APC9, MP9/TP9, GHM9, KH9 or P26 about 20 rounds....

Προσθήκη στη Λίστα Αγαπημένων

B&T Magpul magazine PMAG Gen M3 for APC300 30 rounds cal. .300 Blackout black

[Επικοινωνήστε για Τιμή]

The PMAG® 30 AR 300 B GEN M3™ is a purpose-designed magazine for rifles chambered in 300 Blackout. Since its inception, 300 Blackout shooters have...

Προσθήκη στη Λίστα Αγαπημένων

B&T foregrip with bipod

[Επικοινωνήστε για Τιμή]

This grip is very versatile. Primarily it is a foregrip but due to the integrated bipod, which can be extracted quickly, the operator can enhance...

Προσθήκη στη Λίστα Αγαπημένων

B&T foregrip with bipod

[Επικοινωνήστε για Τιμή]

This grip is very versatile. Primarily it is a foregrip but due to the integrated bipod, which can be extracted quickly, the operator can enhance...

Προσθήκη στη Λίστα Αγαπημένων

B&T bipod with NAR adaptor

[Επικοινωνήστε για Τιμή]

Offside the shooting range usually a support for the rifle is lacking. In these cases a bipod is the perfect solution in order to shoot accurate...

Προσθήκη στη Λίστα Αγαπημένων

B&T foldable foregrip with bipod

[Επικοινωνήστε για Τιμή]

This grip is the perfect solution for many situations. Hinged down it is primarily a fore grip, but due to the integrated bipod, which can be...

Προσθήκη στη Λίστα Αγαπημένων

B&T foregrip with bipod

[Επικοινωνήστε για Τιμή]

This grip is very versatile. Primarily it is a foregrip but due to the integrated bipod, which can be extracted quickly, the operator can enhance...

Προσθήκη στη Λίστα Αγαπημένων

B&T bipod with UIT adaptor

[Επικοινωνήστε για Τιμή]

Offside the shooting range usually a support for the rifle is lacking. In these cases a bipod is the perfect solution in order to shoot accurate...

Προσθήκη στη Λίστα Αγαπημένων

B&T bipod with NAR adaptor

[Επικοινωνήστε για Τιμή]

with rubber feet Additional Information Follow the instructions of the manufacturer Article-no. BT-22332...

Προσθήκη στη Λίστα Αγαπημένων

B&T bipod for B&T APR/SPR

[Επικοινωνήστε για Τιμή]

Offside the shooting range usually a support for the rifle is lacking. In these cases a bipod is the perfect solution in order to shoot accurate...

Προσθήκη στη Λίστα Αγαπημένων

B&T adaptor NAR QD for Harris bipod

[Επικοινωνήστε για Τιμή]

In order to mount a Harris-bidop onto a gun that has no specific mount for this type of bipod but has a NAR/Picatinny rail, this adapter is the...

Προσθήκη στη Λίστα Αγαπημένων

Fixed stock EU compatible for APC9/45/223/300

[Επικοινωνήστε για Τιμή]

As the APC, depending on barrel length, does not comply in some countries with the new minimum length requirement of 60 cm, the foldable stock can be...

Προσθήκη στη Λίστα Αγαπημένων

B&T stock foldable helmet version for SIG 55X

[Επικοινωνήστε για Τιμή]

This in 6 positions length adjustable stock is a special offset version to enable the operator to shot with a closed face shield. Furthermore the...

Προσθήκη στη Λίστα Αγαπημένων

Conversion tube for GHM9 / EU-legal fixed stock

[Επικοινωνήστε για Τιμή]

As the GHM9 with folded stock is shorter than 60 cm, the simple to install stock blocker prevents the stock from being folded. Article-no....

Προσθήκη στη Λίστα Αγαπημένων

B&T shoulder stocks for APC/GL06

[Επικοινωνήστε για Τιμή]

In order to adapt the weapon to the needs of its operator and the mission, B&T offers four different stocks for the APC-family as well three different...

Προσθήκη στη Λίστα Αγαπημένων

B&T shoulder stocks for HK MP5/MP5SD/MP5k

[Επικοινωνήστε για Τιμή]

The MP5 from Heckler & Koch is one of the most widely used submachineguns. B&T offers a selection of shoulder stocks for the MP5, the MP5SD and the...

Προσθήκη στη Λίστα Αγαπημένων

B&T elevated cheek rest for the length adjustable and foldable APC stock

[Επικοινωνήστε για Τιμή]

Special optics (night vision, thermal) require higher mounts. In these cases an elevated cheek rest is helpful in order to position the eye/ the...

Προσθήκη στη Λίστα Αγαπημένων

B&T telescopic stock for B&T APC308

[Επικοινωνήστε για Τιμή]

Due to the in 3 positions length adjustabel telescopic stock, the APC308 offers extrem compact dimensions.The stock can be extracted extremly fast...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for B&T APC9/APC45/APC9 SD

[Επικοινωνήστε για Τιμή]

This brass catcher fits the B&T APC9 and the APC45. Thanks to the B&T QD attachment system it can be mounted/dismounted to the NAR/Picatinny rail...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for B&T MP9/TP9

[Επικοινωνήστε για Τιμή]

This brass catcher fits the B&T MP9 and the TP9. Thanks to the B&T QD attachment system it can be mounted/dismounted to the NAR/Picatinny rail of...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for HK G36 (all versions)

[Επικοινωνήστε για Τιμή]

This brass catcher fits the HK G36 (all versions). Thanks to the B&T QD attachment system it can be mounted/dismounted to the NAR/Picatinny rail of...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for B&T APC 223/556/300

[Επικοινωνήστε για Τιμή]

This brass catcher fits the APC223/556/300. Thanks to the B&T QD attachment system it can be mounted/dismounted to the NAR/Picatinny rail of the gun...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for M4/M16/AR15/C7/C8

[Επικοινωνήστε για Τιμή]

This brass catcher fits almost all variants of the M16 (M4/M16/AR15/C7/C8) which have a handguard with lateral Picatinny/NAR rail. Thanks to the B&T...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for FN SCAR

[Επικοινωνήστε για Τιμή]

This brass catcher fits the FN SCAR in 5.56 (.223) as well as in .308. Thanks to the B&T QD attachment system it can be mounted/dismounted to the...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for HK MP5

[Επικοινωνήστε για Τιμή]

This brass catcher fits the HK MP5. Thanks to the B&T QD attachment system it can be mounted/dismounted to the NAR/Picatinny rail of the gun in...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for HK MP5 SD

[Επικοινωνήστε για Τιμή]

This brass catcher fits the HK MP5 SD. Thanks to the B&T QD attachment system it can be mounted/dismounted to the NAR/Picatinny rail of the gun in a...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for HK MP5

[Επικοινωνήστε για Τιμή]

This brass catcher fits the HK MP5. Thanks to the B&T QD attachment system it can be mounted/dismounted to the NAR/Picatinny rail of the gun in a...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for SIG SG 553

[Επικοινωνήστε για Τιμή]

This brass catcher fits almost all variants of the SIG SG 553, with B&T handguard as well as with SIG handguard. Thanks to the B&T QD attachment...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for HK G36 KSK

[Επικοινωνήστε για Τιμή]

This brass catcher fits the HK G36 KSK. Thanks to the B&T QD attachment system it can be mounted/dismounted to the NAR/Picatinny rail of the gun in a...

Προσθήκη στη Λίστα Αγαπημένων

B&T brass catcher for AK47/74

[Επικοινωνήστε για Τιμή]

This brass catcher fits the AK47 as well as the AK74. Thanks to the B&T QD attachment system it can be mounted/dismounted to the NAR/Picatinny rail...

Προσθήκη στη Λίστα Αγαπημένων

B&T handguard for HK MP5/MP5SD/MP5k

[Επικοινωνήστε για Τιμή]

The MP5 from Heckler & Koch is one of the most widely used submachineguns. B&T offers a selection of handguards for the MP5, the MP5SD and the MP5k...

Προσθήκη στη Λίστα Αγαπημένων

B&T handguard for FN Minimi

[Επικοινωνήστε για Τιμή]

The FN Minimi is the most popular light machinegun in the world. B&T offers five different handguards in order to optimize the gun to the needs of the...

Προσθήκη στη Λίστα Αγαπημένων

B&T handguard for HK G36/G36C/G36K

[Επικοινωνήστε για Τιμή]

The H&K assault rifle G36 is not only issued with several armys worldwide, but also in use with Police and SWAT teams. B&T offers handguards for the...

Προσθήκη στη Λίστα Αγαπημένων

B&T handguard for FN FNC

[Επικοινωνήστε για Τιμή]

The FNC made by FN Herstal was one of the first European made assault rifles in caliber 5.56 x 45 mm. Two handguards tailor made by B&T are optimal for...

Προσθήκη στη Λίστα Αγαπημένων

1 2